Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5.
Mobile printing (Optional)
Method 1: HP Smart
Use the HP Smart app to set up, print, and more.
1.
Scan the QR code or go to 123.hp.com.
2.
Install the HP Smart app.
3.
Run the HP Smart app and follow the onscreen instructions to connect, set up, print, and more.
Method 2: Wi-Fi Direct (wireless models only)
Wi-Fi Direct allows Wi-Fi capable devices, such as smart phones, tablets, or computers, to make a wireless network connection directly to the printer without
using a wireless router or access point. Connect to the printer's Wi-Fi Direct signal the same way Wi-Fi capable devices are connected to a new wireless
network or hotspot.
Enable Wi-Fi Direct
1.
From the Home screen on the printer control panel, swipe the tab at the
top of the screen downward to open the Dashboard, and then touch
(Wi-Fi Direct).
2.
Touch
(Setup).
3.
If the display shows that Wi-Fi Direct is off, touch Wi-Fi Direct and then
switch it on.
For more information on wireless printing and wireless setup, go to www.hp.com/go/wirelessprinting.
Learn more about mobile printing
The product supports AirPrint and Wi-Fi Direct. For more mobile printing information, scan the QR code or go to
www.hp.com/go/LaserJetMobilePrinting.
6.
Set up fax (fax models only - optional)
6.1
Connect the printer
The printer is an analog device. HP recommends using the printer on
a dedicated analog telephone line.
NOTE:
Some countries/regions might require an adapter for the
phone cord that came with the printer.
Connect the phone cord that came with the printer to the Fax port
on the printer and to the telephone jack on the wall.
How do I connect an answering machine or extension
phone?
1.
Remove the plug from the phone port
2.
Disconnect the answering machine phone cord from the
phone jack, and then connect it to the phone port
printer.
Discover the printer
1.
From the mobile device, turn on the Wi-Fi, and search for wireless
networks.
2.
Select the printer name as it appears on the printer control panel.
3.
How do I set up HP printers in digital phone environments?
HP printers are designed specifically for use with traditional analog phone
services. For a digital phone environment (such as DSL/ADSL, PBX, ISDN, or
FoIP), digital-to-analog filters or converters might be necessary when setting
up the printer for fax.
Note: Depending on the phone company, the printer might not be
compatible with all digital service lines or providers, in all digital
environments, or with all digital-to-analog converters. Contact the phone
.
company to determine which setup options are best.
Note: When setting up ring pattern detection in a PBX phone system that has
on the
different ring patterns for internal and external calls, make sure to dial the
printer fax number using an external number for recording the ring pattern.
4
Connect the phone cord that came with the printer to the fax port on
the printer and to the telephone jack on the wall.
Publicité
Table des Matières
