Recording A Video - Dometic PerfectView CAM 360 AHD Notice D'utilisation

Masquer les pouces Voir aussi pour PerfectView CAM 360 AHD:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 37
Using the video system
6.3

Recording a video

A
NOTICE!
Never remove the USB drive when recording in order to avoid damage
or loss of stored data.
I
NOTE
Please note that recording videos is prohibited in several countries.
The video is recorded automatically:
• The video recording begins when the vehicle is started.
• A red dot (fig. 6 1, page 4) on the top left corner of the display indicates that the
system is recording.
• The recording is stopped automatically after the set duration (maximum
10 minutes) and a new recording is started. Once the memory is full, the oldest
file is overwritten automatically.
• The recording stops as soon as the ignition is switched off.
Removing the USB drive
➤ Wait 10 seconds after switching the ignition off before taking the flash drive out
of the device.
Disabling automatic recording
➤ Select "VIDEO SET".
➤ Under "RECORD TIME" select "OFF".
➤ Save your settings.
✓ Automatic recording is disabled.
16
CAM360AHD
EN

Publicité

Table des Matières
loading

Table des Matières