Agrilution Plantcube Mode D'emploi page 32

62
7. Insert tank

Ensure to have placed the inlet filter into
the tank.
Insert the tank into the Plantcube, fill the tank
with fresh water, insert the backflow filter.
8. Insert drawer
Insert the drawers into the Plantcube and
place the cover sheet with Seedbar holders on
the drawers.

Make sure that the drawer engages correct-
ly at the end and that the water inlet is inside
the drawer.
9. Clean door
The glass window may be cleaned as required
on the outside and inside using glass cleaner.
10. Planting
Insert new Seedbars or developing plants
as applicable, and operate the appliance as
normal.
EN
63