Getting To Know Your Appliance; Operating Elements; Function Button - Agrilution Plantcube Mode D'emploi

Getting to know your appliance

Function button

LED Plant Light Module (2x)
42
Water inlet (2x)
Feet (4x)
Plant drawer (2x)
Cover sheet (2x)
Seedbar holder (18x)
Temperature/humidity sensor (2x)
Fan (2x)
Water tank
valve
Water tank
Backflow filter
Inlet filter
Water level indicator

Operating elements


The appliance is switched on as soon as it
is connected to the mains.
Function button
This button has different functions depending
on the appliance's current status. In normal
operation, these are as follows:
Short press (approx. 1 second)
Call up Wi-Fi connection status.
Flashes once: Connected
Flashes twice: Not connected
Long press (approx. 3 seconds)
The appliance switches to set-up mode (see
"Connecting to the Agrilution app"). The but-
ton regularly flashes three times as long as this
mode is active. Holding the button for approx.
3 seconds again will exit this mode, and the
appliance will remain connected to previously
set Wi-Fi.
Long press for approx. 10 seconds
The appliance switches to drain tank mode
(see "Drain Tank"). The button is illuminated
continuously as long as this mode is active.
Holding the button for approx. 3 seconds again
will exit this mode.
If the Plantcube is in drain tank mode (may
also be activated using the app), the function
button may also be used to control the pum-
ping out of water. A short press of the function
button will start or pause the pumping out of
water.
Agrilution App
The app serves as the user interface to the
Plantcube, and supplies all necessary instruc-
tions and information about using the applian-
ce.
For further information and a description of
the app functions, please visit our website.
Contents supplied
The following parts are supplied:
1 x Plantcube
1 x backflow filter
1 x inlet filter
2 x cover sheet
18 x Seedbar holder
1 x drainage tube
1 x mains plug
1 x user manual
EN
43