Agrilution Plantcube Mode D'emploi page 31

60
3. Drain tank
Drain tank as shown in the app or in the "Drain
tank" section.
Remove the tank carefully as soon as no more
water can be drained using the drain tank
mode. Then pour away the remaining water.
The pump stops automatically as soon as the
water level falls below approximately 5 cm (~
4 l).
Then insert the tank back into the device to
collect the cleaning water from the next step.
4. Clean the surfaces
Clean the surfaces marked in hatched lines
using a clean cloth or sponge and conventional
washing-up liquid. Then rinse with water, wipe
clean, and dry off.
Clean all other surfaces with a damp cloth.
These are not designed to come into contact
with running water.
Now drain tank of any water that has returned
to it during cleaning, according to step 3.
5. Clean the tank
Clean the tank carefully using a clean cloth or
sponge and conventional washing-up liquid.
Then rinse with plenty of water and dry off.
The guide cover for the float and the float itself
may be removed. Ensure that you re-insert the
float and the cover correctly after cleaning.
6. Clean Filters
Remove the backflow filter and inlet filter, and
rinse them carefully under running water, or
dispose of them and insert new ones after
cleaning.
EN
61