Campbell Hausfeld VT6195 Instructions D'utilisation page 11

INSTALLATION INSTRUCTIONS (CONTINUED)
Grounding
This product must be grounded. Grounding reduces the risk of electrical shock by providing an escape wire
for the electric current if short circuit occurs. This product must be installed and operated with a power cord
or cable that has a grounding wire.
Breakers and Fuses
The entire electrical system should be checked by a certified electrician. Time delay breakers and fuses are
required for this compressor. A tripped breaker or blown fuses may indicate a direct short to ground, high
current draw, improper wiring, incorrect fuse or breaker size and/or type. This needs to be evaluated by a
certified electrician.
Figure 5 - Wiring Diagram
Improperly grounded electrical components are shock hazards. Make sure all the
components are properly grounded to prevent death or serious injury.
Ground
L1
L2
Motor
9