Cleaning The Air Sensor - brondell P700BB Manuel D'utilisation

MAINTENANCE

Cleaning the Air Sensor

1. Remove the Air Sensor Cover by pinching
the tab towards the cover to release it.
2. Clean the Air Inlets (a) and Outlet Vents (b)
with a small brush or cotton swab.
3. Wet a cotton swab lightly and clean the
Lens (a), Dust Inlet (b), and Dust Outlet (c).
After cleaning, use a dry cotton swab to
remove any moisture.
4. Re-attach the Air Sensor Cover.
Note: Without regular cleaning of the Air
Sensor, the Brondell Pro Sanitizing Air Purifier
will decline in performance.
Step 1
Step 2
b
a
Step 3
c
a
b
13