Deleting Wireless Associations - De Dietrich AD340 Notice D'installation Et D'utilisation

17 - Deleting wireless associations

❶ The thermostat must be in
Shutdown mode.
Press and hold down the
2nd button from the left
for 5 seconds.
The screen displays the
thermostat version.
❷ Press and hold down again the 2nd button
from the left for 5 seconds.
The screen displays the rF01 menu.
❸ Press + to display rF03,
then press OK.
The number of associated receivers is displayed
in the centre of the screen.
❹ Press and hold OK for 5 seconds.
The thermostat deletes its wireless associations
until it displays '00' .
To exit the mode, press on C, then on >>.
If the display does not return to 00, this means
that some receivers are not responding.
You can remove the association with a non-
responding receiver by repeating the step
described above.
At step ❸, press once more on + to display rF04
and press OK to go to the next step ❹.
58
1 1
>5s >5s
2 2
>5s >5s
3 3
4 4
>5s >5s