Wireless Association - De Dietrich AD340 Notice D'installation Et D'utilisation

3 - Wireless association

1
... ... ...
❶ Set the receiver(s) to association mode
(see the receiver guide),
❷ The thermostat must be in Shutdown
mode.
Press and hold down the 2nd button from
the left for 5 seconds.
The screen shows the thermostat version.
❸ Press and hold down again the 2nd button
from the left for 5 seconds. The screen
displays the rF01 menu.
❹ Press OK.
The thermostat searches for receivers
with which to associate.
The number of receivers found and
associated with is displayed in the centre
of the screen.
>3s
2
>5s
Number of receivers
3
>5s
4
37
EN