Configuration; Cf01 - Correcting The Temperature Measured - De Dietrich AD340 Notice D'installation Et D'utilisation

4 - Configuration

1
>5s
The thermostat must be in shutdown mode.
❶ Press and hold down the 2nd button from the left for 5 seconds.
The screen displays the thermostat version.
❷ Press OK.
The screen displays the CF01 menu.
❸ Make your selection or setting by + and -.
Press OK to validate and go to the next setting.
To exit the mode, turn the selector knob
Comment: the greyed-out sections of the tables
correspond to default values

CF01 - Correcting the temperature measured

Setting from -5°C to +5°C.
Example: if the temperature displayed by the unit is 19°C and the
actual temperature (thermometer) is 20°C, set +1°C.
38
2
- 5°C -> + 5°C
4
3