Using The Dispenser - Whirlpool WTW7120HC Guide De Référence Rapide

LOADING RECOMMENDATION
For best performance, it is recommended to load items in loose
heaps evenly around the washplate and agitator.
RINSING BEFORE RUNNING A WASH CYCLE
Press
faucet button
Water Faucet Operation
Press the faucet button once to turn on and press again to
■
turn off.
Faucet will automatically shut off after 10 minutes or when max
■
water level is reached.
Water will automatically drain if water level becomes too high or
■
if the lid is left open for 10 minutes.
On Load & Go models when the faucet is on touch TEMP
■
button to select water temperature or touch LOAD & GO button
to manually dispense a dose of detergent.
Fabric Brush
1. Turn brush from body to open.
2. Add liquid laundry detergent.
3. Turn to close.
4. To dispense detergent from fabric brush push button.
MORE WATER WHEN YOU WANT IT
Auto Sensing & Deep Water Wash
The washer will adjust the water level to the optimal amount for a
■
High Efficiency wash of the detected load size.
Touch "DEEP WATER" to add more water to the wash load.
■
There are four levels of deep water "Auto", "Medium", "High",
■
"Max Fill".
Not all levels are available on all cycles.
■
The washer dampens and moves the load, the level of the items
■
will settle in the basket. This is normal, and does not indicate that
more items should be added.
IMPORTANT: You will not see a washer basket full of water as with
your past agitator-style washer. It is normal for some of the load to
be above the water line.

USING THE DISPENSER

Load & Go™ feature will default On for each cycle unless
■
disabled.
Touch LOAD & GO button to view detergent dispensing options.
■
Hold LOAD & GO button on the control panel to choose a
■
detergent concentration between 2X and 10X. Hold for
3 seconds.
Pull the drawer completely out for easy refilling.
■
1
3
Max Fill
High
Medium
Auto
2
4
3