Cata GHI 6104 BK/A Instructions Pour L'installation, L'utilisation, L'entretien page 63

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

If the hob is hot wait until it will be cooled.
In order that you use the glass hob and grills for longer periods
you need to clean them with appropriate cleaning agents at
certain intervals.
Cleaning on stainless surfaces should be conducted in
accordance with the steel surfaces, and the surface should be
dried preferably with a soft leather part.
In order to avoid any damage to the burning system do not use
burning system when the burners are not installed.
After the thermo-coupled cleaning providing plug and safety
system, clean it to place burners in suitable manner.
Wash the upper burning heads at certain intervals with water and
clean and dry the gas channels with brush. Pay attention to
install the burning heads on their places.
When you clean the burner do not use acid, thinner, benzene
or similar chemical.
You need to clean your glass hob and its grills with suitable
cleaning agents in order to use it for longer period.
It should be cleaned with suitable cleaners for stains and oil.
Harsh cleaning agents, stain removers and detergents, wire
wool and sponge should not be used.
Do not allow heating of the pans as empty since the heat
accumulated at the bottom may damage the glass surface.
No cold liquid should be poured on the glass surface or the
burners when they are hot. The glass may crack due to thermal
shock.

Publicité

Table des Matières
loading

Table des Matières