Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
This equipment should be mounted at the well ventilated places and as
per the regulations in force. The installation personnel should consider
the laws and norms applicable to the release of burning gases and
ventilation.
Your hob is designed to be installed on the standard counters
which you may find in the market.
The materials used on the surface and the link partitions under
the counter should be resistant against minimum 100°C.
A safe distance should be left between the hob and the
counter walls (Figure 4).
The hole to be provided for the hob on the counter should be
as per the figure. (Figure 4)
The distance between the hob sole and the partition should be
at least 25 mm. (Figure 5)
Publicité
Table des Matières
