VESTEL EVC02-AC22 Série Manuel D'utilisation page 5

card is removed successfully, VESTEL EVC
beeps again.
If no beep sound, your Slave card is not compatible
to operate with VESTEL EVC.
Note: Local authorization list can keep up to 20 slave
cards.
Resetting Local Authorization List;
1. Unplug your device.
2. While plugging your device, press the button and
hold it for about 10 seconds until you hear the device
start beeping.
3. Wait until device stops beeping.
4. Now the list is reset and you can assign your new
master RFID card.
English - 4 -