Table Des Matières; Description; Safety; Purpose Of This Manual - Greenlee 990 Manuel D'instructions

Table of Contents
Description .................................................................... 2
Safety ............................................................................ 2
Purpose of this Manual ................................................. 2
Important Safety Information .....................................3-4
Identification .................................................................. 5
Specifications ................................................................ 5
Setup ............................................................................. 6
Hydraulic Connection ................................................ 6
Electrical Connection/Grounding Instructions ........... 6
Operation ....................................................................... 7
Operating Instructions ............................................... 7
Refilling Hydraulic Fluid ............................................. 7
Manual Release Shaft ................................................ 7
Maintenance .................................................................. 8
Troubleshooting ............................................................. 9
Illustrations and Parts Lists ....................................31-36
Main ....................................................................31-32
Solenoid Valve Assembly ......................................... 33
Pressure Switch ....................................................... 34
Pump Assembly ....................................................... 35
High Pressure Joint .................................................. 36
Greenlee Tools, Inc.

Description

The Greenlee 990 Hydraulic Power Pump is an elec-
trically powered single-stage pump that develops a
maximum of 700 bar (10,000 psi). This pump is intended
to provide hydraulic power for remote cutting and
crimping tools.
This pump has a factory-set internal pressure relief
valve.

Safety

Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.

Purpose of this Manual

This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
Greenlee 990 Hydraulic Power Pump.
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.greenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Tools, Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
Mobil DTE is a registered trademark of Mobil Oil Corp.
KEEP THIS MANUAL
2
990 Hydraulic Power Pump
Fill unit with hydraulic oil before
operating pump.
Failure to fill unit with oil will result in
damage to the pump.
Do not discard this product or throw away!
For recycling information, go to www.greenlee.com.
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070