Oceanic OCEAISHT1000W Guide D'utilisation page 35

save.
 When the room temperature is higher than the selected temperature, the heater will stop
heating.
III. Setting menu ( + & - )
Press + & - at the same time to enter setting menu interface.
Press + / - to choose from time setting
Window detection mode
icons keep on.
Press + & - at the same time to exit the setting menu or after 30 seconds it will automatically exit
and go back to working interface.
1. Time setting
Press + & - at the same time to enter setting menu interface, and + / - to choose from time setting
. When
Press + / - to adjust the hour 00-23.
Press OK to confirm hour setting and move to minute setting 00-59.
Press OK to confirm minute setting and move to day of week setting1-7.
Press OK to confirm or after 30 seconds, it will automatically save and go back to working
interface.
2. Program mode setting
Under program mode, you can choose from 7 pre-set 24-hour programs (P1-P7) for each day of
week. The 7 pre-set 24-hour programs (P1-P7) are programmable. For each hour, you can
choose between comfort mode and economic mode.
Under program mode, the default setting for day 1 to 7 of the week are as follows:
day 1 to day 5: work with P1,
day 6 to day 7: work with P3.
The default setting of P1-P7 are as follows:
, keyboard lock setting
is flashing, press OK to enter time setting.
Page 35 of 43
, program mode setting
. The selected icon will flash while other
,