Oceanic OCEAISHT1000W Guide D'utilisation page 27

constitutes your wall, as well as the weight of the
appliance. Observe the diameter of the fixing screws
indicated in this manual.
Do not modify the holes for securing the unit or its
mounting bracket to the wall.
Drill the wall with a drill of the appropriate size for the
anchoring system. Remove debris and dust.
Regularly check the mounting points of the device
on the wall. Tighten them if necessary.
INSTALLATION
To hang the heater on the wall:
Choose
location for the radiator
(respect the minimum
distances)
Mark the location of the 4
wall fixing screws.
Drill the wall to fix the
appropriate
system.
Attach the 2 upper hooks
to the wall.
Page 27 of 43
a suitable
anchoring