Oceanic OCEAISHT1000W Guide D'utilisation page 34

2. Program modes
appliance is working on Program mode, press and hold OK button for 3 seconds, the
appliance will shift from Program mode to Fil pilote mode.
When the appliance is working on Fil pilote mode, press and hold OK button for 3 seconds, the
appliance will shift from Fil pilote mode to Program mode.
The interface of program mode and Fil pilote mode are as below:
Program mode
Note: For the program mode, mode setting and mode selection is separated. If you want to set
the program mode, press + & - together to enter setting menu to choose program mode setting
and press OK to enter setting interface. For details, please refer to part 2 "Program mode setting"
under section III "Setting menu".
Fil-pilote mode
External Mode Setting
Comfort mode
Comfort mode
Comfort mode
Economic mode
Antifreeze mode
Standby mode
II. Temperature setting
Under the mode of comfort or Eco (excluding anti-freezing mode), temperature is adjustable.

Press + or - to choose the desired temperature for comfort mode between 5°C and 29°C. The
temperature difference between mode ECO and mode comfort is 3.5°C, so the temperature
range of mode ECO is between 1.5°C and 25.5°C.
Press other buttons except +/- to finish the setting, or after 5 seconds it will automatically

Icon Displayed
-1
-2
and Fil pilote
Fil pilote
Press OK button to choose mode
Program modes or Fil pilote mode.
Under Fil-pilote mode, select the mode
via the external control (for France only).
For other countries except France, if
you choose mode Fil pilote P, the
appliance will work at comfort mode as
default.
If the working interface is at Program
mode, press and hold OK button for 3
seconds, the appliance will shift from
Program mode to Fil pilote mode.
When
programmed, the display shows:
Page 34 of 43
are mutually exclusive. When the
the external controller is