Norsup 7024632 Manuel D'installation Et D'instructions page 22

4.OPERATION AND USE
(5) History of the fault
In the main interface click fault display key, interface displays as follows:
Fault code
If no failure, main interface displays static "
When fault occurs,the fault icon will flash between the "
the failure interface will record time, code, name of the fault.
After troubleshooting, if you do not check the failure record,
the main interface will display static
failurerecord, the main interface will displays static
Failure record is in reverse order,according to the happening time.
Press the "Clean" key,you can delete the fault record.
The fault name
Fault time
day - month - year
hour:min
"
"; if you check the
";

" ",