Atlantis A02-RA3+ Guide Rapide page 56

•
Now select Use the following IP address and insert the
following values:
•
IP Address: Insert your Public IP
•
Netmask: Insert Netmask provided by ISP
•
Gateway: Insert router Default Gateway
If these data will be supplied automatically from ISP server
select Obtain an IP address automatically via DHCP
client.
Press Apply to set as active the new configuration , then press on
Save Config to FLASH (and then on Save)
configuration.
Now you can go to Configuration-Firewall-General Settings
section. Here, clicking on Enable button and selecting protection
level (for All blocked/User-defined refer to manual on attached
cd-rom) you Internet navigation will be more secure.
Press Apply to set as active the new configuration , then press on
Save Config to FLASH (and then on Save)
configuration.
ENGLISH
to save the
to save the
56