Automatic Mode; Program Mode - Watts Water Technologies BT Série Guide D'installation Rapide

Be Careful:
In this mode your installation can freeze.
- At any time, when display is off, press on the (Ok) key to display a few seconds the current temperature and time.
- To restart your installation, use the navigation keys (◄) or (►).
3.4

Automatic mode

In this mode the thermostat will follow the chosen program (Built-in or customized) according to the actual time and the
Comfort and Reduced setting temperatures.
You can easily override, until next program step, the current program temperature by changing the value with (-) or (+).
Setting temperature will blink.
The small hand logo will be displayed when override function is active.
If hand logo blinks then ITCS is ongoing.
3.5

Program mode

Program of the day
When you enter in the Program mode, the first operation is to chose the program number with (-) or (+) keys.
You can choose between a built-in program P1 to P9 or a user program U1 to U4.
If you chose a Built-in program P1 to P9,
You can only see and chose the program.
P1: Morning, Evening & Weekend
P2: Morning, Midday, Evening & Weekend
P3: Day & Weekend
P4: Evening & Weekend
P5: Morning, Evening (Bathroom)
P6: Morning, afternoon & Weekend
7H – 19H (Office)
P7:
8H – 19H & Saturday (Shop)
P8:
P9: Weekend (Secondary house)
(See the Annexe parts to view a complete description of the Built-in program)
- Use the navigation keys (◄) or (►) to change the program day displayed.
- Press the (OK) key to confirm your choice and come back to the main screen (in AUTO mode)
If you chose a user program U1 to U4,
As above you can choose the program, see it,
but you can also customise it.
Default setting:
U1, U2, U3, U4 = Comfort all week
- Press on the edition key ( ) to customise a user program.
Current day
Program followed
10