Before Use - Teac S-300HR Mode D'emploi

Checking the included accessories
In the unlikely event that any of the following included
items is missing or damaged, please contact the store
where you purchased the product or our customer sup-
port (contact information on back cover).
Speaker cables (2 m or 6 1/2 ft) × 2
Screw spikes × 6
Washers × 6
Nuts × 6 (already attached to screw spikes)
Spike bases × 6
Cleaning cloth × 1
Owner's Manual (including warranty) (this document)
× 1
Precautions for use
o Do not strike the enclosure (cabinet) or front surface
Saran Fiber with hard objects. Doing so could cause
scratching or damage the speaker units.
o Avoid contact with rubber and vinyl for long periods of
time, because it could damage the surface.
o This product has been designed to minimize magnetic
effects, but you should not place cards, tapes and discs
that use magnetic recording or other items that are eas-
ily affected by magnetic force on top of it. Failure to do
so could result in data loss or damage.
o Listen within an appropriate input level range from the
amplifier. Excessive input could damage the speaker
units.
Moreover, even if the input level is less than the maxi-
mum, signals with a frequent clipping, for example, will
have a negative impact on the speaker units. Please
be careful to prevent distortion of the audio at the
amplifier.
Cleaning
o When the surface becomes dirty, wipe it with the
included cleaning cloth. Do not wipe it with fine-
meshed cleaning cloths, chemical cleaning cloths,
thinner, abrasives or similar materials. Doing so could
damage the surface.
o Use a clothing brush or a similar tool to remove dust
that sticks to the Saran Fiber.

Before use

Using the TEAC Global Site
You can download updates for this unit from the TEAC
Global Site: http://teac-global.com/
1) Open the TEAC Global Site.
2) In the TEAC Downloads section, click the desired lan-
guage to open the Downloads website page for that
language.
NOTE
If the desired language does not appear, click Other
Languages.
3) Click the "Search by Model Name" section to open the
Downloads page for that product. (Users in Europe
should click the product name in the "Products" sec-
tion instead.)
4) Select and download the updates that are needed.
Product registration
Customers in the USA, please visit the following TEAC
website to register your TEAC product online.
http://audio.teac.com/support/registration/
3