Connections - Vicon AurorAcorD Guide Rapide

Pin No.
1-16
20-35
NOTE: Internal jumpers and menu settings are set at the factory for
RS-232 on com1 and RS-422 on com2. These defaults may be
changed to use RS-232, RS-422 or RS-485 (2-wire AurorANet or 4-
wire) on com1 or com2. Menu settings must be changed as discussed
in the Programming chapter of Instruction Manual XX091. Jumpers
may or may not need to be changed as discussed in the Reference
chapter of Instruction Manual XX091. If you have not changed the
factory default jumper settings, you can use the AurorANet termination
box on com1 without changing jumpers. Otherwise, remove
appropriate jumpers before using the AurorANet termination box as
discussed in the Reference chapter of Instruction Manual XX091.
2 Vicon Industries Inc. 89 Arkay Drive, Hauppauge, NY 11788
Alarm Devices
Signal
Alarm 1-16
19 Normally open dry contact alarm
Ground
36 Dry contact alarm common
37 Normally closed dry contact alarm
Total loop resistance
of this cable must be
less than 1 K Ω .
Connector and
pins supplied in
accessory kit.
120VAC and 230VAC
cables supplied
in accessory kit.
Quick Guide
ALARM
COM1
RS-232/RS-422
Termination Box
(part # 1298-3140-01-00)
V1400X-IDL
Up to 9
units per
IDL.
V1400X-IDL
RS-485
RS-485
Data +
Data–
N.C.
N.C.
Keyboard
Ground
Data
Keyboard
+5 V Out
Clock
AurorANet Termination Box
(part # 1298-3190-01-00)

Connections

Terminate with 75 ohms at the destination devices. The Looping 2
connector provides outputs 9-16. Use the "A2K Video" labels for
outputs 9-16. Do not refer to the "Video" label.
TO MONITORS
A2K A2K
Video Video
7/15 5/13
A2K A2K A2K
Video Video Video
8/16 6/14 4/12
Purchased separately
(product code 4476)
Remote control cable
supplied with AURC-NIU
15 13
16
14
COM2
Cable supplied
by installer.
Rcvr.
Dome
RS-422
Resp In –
RS-422
Comm Out –
Keyboard
Data
+5 V Out
RS-232/RS-422 Termination Box
(part # 1298-3140-01-00)
A2K A2K
Video Video
3/11 1/9
A2K
Video
2/10
AURC-NIU
DC12V SERIAL ETHERNET
11 9
12
10
Camera
VIDEO OUT
RS-422 Resp In +
or RS-232 RxD
RS-422 Comm Out +
or RS-232 TxD
Ground
Keyboard
Clock