Selecting The Playback Source - Vicon AurorAcorD Guide Rapide

Enabling Motion Detection
2 2
MENU
AUX2 AUX2
4 Define detection threshold. 1=
most sensitive setting. 9= dramatic
AUX4
change needed for detection.
Defining Camera Priority
2 2
MENU
AUX2 AUX2
Creating a List of Cameras to be Recorded
1-16
To define which
cameras will be
RECORD
recorded.
Using Loopback Mode to Define Recorded Image Quality
Note: Refer to "Choosing Sensitivity & Quality Settings for Most Recording Time and/or Least Hard Drive Usage" for more information.
2 6
MENU
AUX2 AUX6

Selecting the Playback Source

2 6
MENU
AUX2 AUX6
8
5 1 1
AUX5 AUX1 AUX1
5 Each window is divided into
detection zones. Define the
AUX5
number of zones.
Set update priorities.
3 1
Use "High" for high
AUX3 AUX1 update rate on live
main display.
Enable Loopback Mode.
1 1 1
Note: Recording and playback
stops. Recording is simulated
AUX1 AUX1 AUX1
during loopback mode so that
you can set record quality.
2 3
Select hard drive, CD-
RW or floppy disk.
AUX2 AUX3
Visit our home page at: http://www.vicon-cctv.com
Quick Guide
1-16 2
Define camera
number.
AUX2
6 Use trial and error to define
which zones should be enabled
AUX6
for motion detection.
2
AUX2
Note: Your AurorAcorD may not
include a CD-RW or floppy drive,
depending upon the model.
For complete instructions, see Instruction Manual XX091.
Programming
3
Use to define
Define
HELP
motion settings.
title.
AUX3
Define quality for each
Return to the
camera. Higher quality
previous screen
means more data stored
and disable
on the hard disk.
Loopback Mode.