Listening To The Radio - Teac SL-D950 Manuel Du Propriétaire

1 3
TUNING
1
Select "TUNER" using the FUNCTION button.
2
Select FM or AM using the FM/AM button.
3
Select the station you want to listen to (auto
selection).
Hold down the AUTO TUNING button (‡/°) for
more than 2 seconds and release it when the
frequency display begins to change.
When a station is tuned in, the tuning process will
stop automatically.
< To stop the auto selection, press the AUTO TUNING
button.
Selecting stations which cannot be tuned
automatically (manual selection)
When the AUTO TUNING button (.or/) is
pressed momentarily or the MULTI JOG knob is
turned, the frequency changes in fixed step.
Press the AUTO TUNING button repeatedly or turn
the MULTI JOG knob, until the station you want to
listen to is found.
26

Listening to the Radio

2
or
Checking the tuner frequency
If the clock is displayed, press the DISPLAY button
to display the current band and frequency for 20
seconds.
If the reception is poor
For the best reception, rotate the FM or the AM
antenna until you get stations clearly.
FM MODE button
Pressing this button alternates between Stereo
mode and Mono mode.
Stereo
FM stereo broadcasts are received in stereo and the
"STEREO" indicator lights in the display.
< If the sound is distorted and the "STEREO"
indicator flashes, the signal is not strong enough
for good stereo reception. In this case, change to
MONO mode.
Mono
To compensate for weak FM stereo reception,
select this mode. Reception will now be forced
monaural, reducing unwanted noise.