GoldenEar Invisa HTR 7000 Manuel Du Propriétaire page 10

Invisa HTR 7000/8000 Owner's Manual
®
7. Loosen the four rotating lock arms on the speaker by turning the arm screws on the front of the speaker
counterclockwise
• Make sure the rotating lock arms are positioned inwards (Figure 5) so that your speaker fits into
your cutout hole.
LOCK ARM SCREWS (4).
TURN COUNTER-
CLOCKWISE TO
LOOSEN.
8. Holding the speaker's front lip with your thumbs and index fingers, carefully slip the speaker into
the cutout and hold firmly in place. (Figure 6).
10
GoldenEar Invisa HTR 7000/8000 Manual
1 / to 1 turn, just enough to allow the lock arm to move freely (Figure 4).
2
Figure 4 Figure 5
Figure 6
LOCK ARM (4)
TUCKED IN PRIOR TO
INSTALLING SPEAKER
IN-WALL/CEILING.