Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
The fan drive is mounted utilizing a left-hand thread. Turn
clockwise to loosen. May require tapping with hammer to
loosen.
3. Remove fan from the fan drive after removal from
the truck.
4. For best results, check and replace any worn belts.
5. Check fan for any damage and clean radiator prior to
installation.
Installation
1. Attach fan to Horton viscous fan drive using fasten-
ers included in package. Torque to 18 ft-lbs (24 Nm).
Self-tapping bolts supplied. Holes may not be fullly
threaded when new.
2. Using the International wrenches ZTSE43221 and
ZTSE43972, install the Horton viscous fan drive on
the engine.
Left-hand thread, turn counter-clockwise to tighten.
NOTE
NOTE
ENGLISH
13
Publicité
Table des Matières
