Wireless Network (Wps); Manual Configuration - Albrecht DR 470 Manuel

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Enter WEP or WPA code to connect the WiFi.
If it is accidentally pressed ► to move a redundant entry, press ◄ to correct.

16.3. Wireless Network (WPS)

If you are using a router with WPS/QSS button, you may set up the network connection simple via
WPS function. Enter it and go to press the WPS/QSS button on your router within 120 seconds. The
connection between the router and the DR 470 will then be configured automatically.

16.4. Manual Configuration

You can choose DHPC (which IP assigned automatically) or manually input IP address for wireless
network connection.
When you select manual setting for wired connection, the followings have to be entered:
1. SSID (the name of Access Point);
2. IP Address;
3. Subnet Mask;
4. Default Gateway;
5. Preferred DNS Server;
6. Alternate DNS Server.
You may choose (Manage) specific network if you have setup more than one network connection
within an area.
42
English

Publicité

Table des Matières
loading

Table des Matières