Changing The Projector's Password - Samsung The Premiere LSP7T Manuel De L'utilisateur

The remote control does not work.
• Check if the Remote control sensor at the front right of the Projector blinks when you press the remote's Power
button. If it does not, replace the remote control's batteries.
• Make sure that the batteries are installed with their poles (+/–) in the correct direction.
• Try pointing the remote directly at the Projector from 1.5-1.8 m away.
• If your Projector came with a Samsung Smart Remote (Bluetooth Remote), make sure to pair the remote to the
Projector.

Changing the Projector's password

> Settings > General > System Manager > Change PIN
1. Run Change PIN and then enter the current password in the password field. The default password is "0000"
(France: "1111").
2. Enter a new password and then enter it again to confirm it. The password change is complete.
• If you forgot your PIN code, press the buttons in the following sequence to reset the PIN to "0000" (France: "1111"):
On the Samsung Smart Remote: Select
Up > .
English - 16
(Volume) button. > Volume Up > > Volume Down > > Volume