Reset To Factory Default Settings - Axis P7216 Guide D'installation

AXIS P7216 Video Encoder
Auxiliary Connector
The video encoder is equipped with an additional RJ45 network connector. The purpose with
this connector is to simplify maintenance work on the video encoder that requires connection
to a computer.
Note
The auxiliary connector should only be connected during maintenance work and should not
be connected to the same network as the SFP/NET connectors.
Network Redundancy
The video encoder have built-in network redundancy functionality. The network redundancy
functionality works automatically and requires that both the SFP module and the RJ45 connector
(NET) are connected.
Note
The auxiliary RJ45 (AUX) connector does not provide redundancy functionality.
Access the Product
AXIS IP Utility and AXIS Camera Management are recommended methods for finding Axis products
on the network and assigning them IP addresses in Windows®. Both applications are free and can
be downloaded from www.axis.com/techsup
The product can be used with most operating systems and browsers. We recommend the following
browsers:
• Internet Explorer
®
• Safari with OS X
TM
• Chrome or Firefox
For more information about using the product, see the User Manual available at www.axis.com

Reset to Factory Default Settings

Important
Reset to factory default should be used with caution. A reset to factory default will reset
all settings, including the IP address, to the factory default values.
Note
The installation and management software tools are available from the support pages
on www.axis.com/techsup
To reset the product to the factory default settings:
® ®
with Windows
®
®
with other operating systems.
16