Quick Reference; Connections - Zeck Audio VECTOR T2A-M Mode D'emploi

1
2
7
8
9
11
LEVEL
MODULE
INPUT 1
BALANCED
MIC/LINE
INPUT 2
BALANCED
MIC/LINE
INPUT 3
BALANCED
MIC/LINE
BALANCED
OUT
(TIP- SEND)
INSERT
(RING - RETURN)
POWER
MAINS
SUPPLY
TOROIDAL
ISOLATION
TRANSFORMER
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THIS APPARATUS MUST BE EARTHED. TO REDUCE THE
RISK OF FIRE OR ELECTRIC SHOCK DO NOT EXPOSE
THIS APLLIANCE TO RAIN OR MOISTURE.
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED PERSONNEL.
RISQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR.
8
INPUTS
MAIN
LEVEL
POWER ON
RAMP
GENERATOR
VCA
LF SPEAKER LF SPEAKER
PROTECTION IMP.SIMMULATION
LIMIT
LF CLIP
DETECTOR
HF DRIVER
PROTECTION
HF CLIP
HF
DETECTOR
AMP
TONE EQ +
CONTROL TIME ALIGN
+25 V
LF
AMP
+15 V
0
-15 V
-25 V
POWER ON DETECTOR
!
13
Owner's manual VECTOR T2A•M

3. Quick reference

3
1
2
3
4
4
5
5
6
6
7
8
9
10
11
12
13
10
4. Connections (Fig. 3)
Inputs:
The XLR input (3) and both 1/4" inputs (4) accept balanced
or unbalanced signals and can be switched for high-level
(Line) or low-level (Microphone) operation with their
correspondent MIC/LINE switch (5). A bright MIC LED (6)
indicates that line input level has been selected for the
correspondent input (Fig 1).
Output:
The BALANCED OUTPUT (2) allows for easy linking of
HF several VECTOR system cabinets, e.g. Zeck VECTOR S3A
subwoofer, or other active cabinets by Zeck.
Fig. 1
LF
12
Insert jack:
The INSERT jack (1) allows to connect external effect
devices to the T2AM. This 1/4" stereo jack provides
both send and return connections (Fig. 2)
Insert jack (1/4" stereo jack)
Balanced output (XLR male)
Balanced input #1 (XLR female)
Balanced input #2 and #3 (1/4" stereo jack)
MIC/LINE switch for channels 1-3
'MIC LED' for channels 1-3
Level controls for channels 1-3
'Limit' LED
Master volume control
4-Band equalizer
'Power On' LED
Power switch
Mains input socket
1.
„LINE" „MIC"
© Zeck Audio
2.
+