GreenWorks Pro SNC404 Manuel D'opérateur page 11

2. Remove the nut(3).
3. Remove the 5 screws(1) and side wear pad(2) that
secure the left side cover.
4. Remove the belt(4).
5. Using a socket wrench, remove the large pulley(5).
English
6. Remove the screws(1) that secure the left side
plate.
7. Pull the axle(6) and remove the old impeller, install
the new impeller.
8. Reinstall the nut(3) and right side cover.
9. Reinstall the left side plate, large pulley(5), belt(4)
and left side cover.
6
5
11
6
3
3
4
2
1
EN