Control Devices - Atlantis A14-SC930-PT Mode D'emploi

Control devices

 Tap My Home[
account
 Tap a device for control it and view the video stream. You can know immediately know the quality
of the wireless signal, listen to what was captured by the camera microphone, select the SD/HD
video stream and switch to full screen
 Tap Screenshot [
 Tap Speak [
 Tap Record [
 Tap Playback [
 Tap Direction [
youwith 360 degrees of vision.
 Tap Alarm [ ] in order to enable motion detection. Built-in motion sensors detect movement,
and the camera will send you push notifications and app alerts.
 Tap Light Control in order to select the Led Mode.
 Tap Cloud Storage [
] then All Devices. The app will display all the devices connected to the
] save screenshots into the memory of your SmartPhone for viewing.
] activate the speaker to talk to a remote party.
] save videos directly into the memory of your SmartPhone for viewing.
] in order to play the recorded video.
] in order to rotate your camera by sliding on your smartphone, providing
] in order to purchase a plan for upload encrypted video data.
You can remove the socket controlled by your account in one of the
following 2 ways:
 (APP): My Home[
] then Remove Device and Confirm. The camera plays the voice
message: "Reset, camera reboots".
 Reset: press the button for about ten seconds, until the camera plays
the voice message: "Reset, camera reboots".
One device can only be added with one App account, if the device has been
added with another account already, then it can't be added to any another
account again.
Tap [ ] for advanced settings:
 Basic
To activate the Screen mirror (Flip Screen), display information with data
and time on the OSD (Time Watermark) and Talk mode.
 Storage Setting: here you can format the SD card.
Detection Alarm Setting: in order to enable motion detection.

], tap on the device you want remove, tap [
Function
4
ENG
Settings: