Atlantis A14-SC930-PT Mode D'emploi page 3

 Tap Security & Video Surveillance->Smart Camera.

Tick (make sure the indicator is flashing quickly... ) then tap Next.
 Tuya app will show you the network that you are currently connected to, which is the same that
the Smart Plug will connect to. Tap Change Network in order to select another wireless
network.
 Enter, if not already present, the wireless network access password.
 Tap Next.
 Scan the QR Code with Smart Camera
 Tap Heard the beep when the device will play the sound message "Connect Router". And
you can complete the configuration about 30s. Tap No Prompts and follow the isntruction.
 The app wil try to connect your device. Once finished the the device will play the sound message
"Connected to Internet". Tap [
Done.
] in order to change the device's name and room. Tap
AP mode can be used for set the device in event of problem during the
previous procedure.
 Connect the adapter to the Smart camera. The Smart camera (after
about a minute will play 3 beeps) should start playing the message:
"Wait for WiFi Config!". If there is a problem, the Smart Camera can
be reset [press the reset button for about 10 seconds, the camera will
play the sound message: Reset, camera reboots "].
 Tap +, Others then tap Others(Wi-Fi). Tuya app will show you the
network that you are currently connected to, which is the same that the
Smart WiFi cam will connect to. Enter, if not already present, the
wireless network access password. Tap Next.
 The camera will play the sound message "Connect Router". Once
finished the the device will play the sound message "Connected to
Internet". Tap [
Tap Done.
] in order to change the device's name and room.
3
ENG