Atlantis A14-SC930-PT Mode D'emploi page 2

Ensure that the pedestal is securely anchored to the wall (in order to prevent
the Smart WiFi Cam from falling).
The lens must not be exposed to direct sunlight.
Connect the adapter to the Smart camera. The Smart camera (after about a minute will play 3
beeps) should start playing the message: "Wait for WiFi Config!".
 Camera boots up and emits 3 beeps after about one minute.
 After booting the camera, when it is NOT configured, plays the following
 After booting the camera, when configured, plays the following voice
 After booting, when the camera is configured but cannot connect to the
 Reset: press the button for about ten seconds, until the camera plays the
Installing Tuya App on Apple/Android devices
 Download and install the Tuya application from the App Store or PlayStore on your
iPhone/iPad/Android. Touch the App Store/PlayStore icon, then Search for Tuya Smart. The
application is free.
 On your smartphone, tap the Settings icon, then Wi-Fi. Your smartphone will show you the
network that you are currently connected to, which is the same that the Smart Plug will connect
to.
 Launch the Tuya app.
 At the first start-up You need to create a new account (if this step has already been done, go
immediately to the section where the controlled outlet is added). Tap on Register and accept
the Privacy Policy, tapping on Agree.
 The system will identify automatically the country/region you are in, or you may choose to select
manually a country/region. Enter your email (mobile phone number) and tap Obtain
Verification Code.
 Enter the authentication code you received. Then enter the password and tap Completed to
complete registration.
 When logged in, click Create family to go to the Add family page.
 Family Name can be entered manually, as necessary. Click Set location to go to the map.
Move the icon manually to change the address. Click OK to confirm the address.
 Click Add Room to add a room. Click Done at the top right corner to complete room settings.
Room settings can be changed anytime.
 The Tuya app will display now the Home Page.
 Now we will add manualy a new device.
 Connect the adapter to the Smart camera. The Smart camera (after about a minute will play 3
beeps) should start playing the message: "Wait for WiFi Config!". If there is a problem, the
Smart Camera can be reset [press the reset button for about 10 seconds, the camera will play
the sound message: Reset, camera reboots "].
 Tap My Home[
voice message: "Wait for WiFi Config!".
message: "Connected to Internet!"
router, it plays the following voice message: "Router connect Fail!".
voice message: "Reset, camera reboots".
], then +[ ].
2
ENG