Configuration And Operation; Remote Monitoring And Control - Tripp-Lite PDUMH15NET Manuel Du Propriétaire

Features
A

Configuration and Operation

Remote Monitoring and Control

The PDU provides remote monitoring
control and more via Web browser, telnet and
B
SNMP-based Network Management Systems.
For more information about configuration and
operation of the PDU via the PowerAlert Web
browser interface, refer to the
SNMPWEBCARD User's Guide, included on
the CD-ROM bundled with the PDU.
201110149-93-2718.indd 11
continued
PS/2 Port: Use this port to connect a Tripp Lite ENVIROSENSE
environmental sensor to provide remote temperature/humidity
monitoring and a dry contact interface to control and monitor alarm,
security and telecom devices. Contact Tripp Lite Customer Support
at (773) 869-1234 for ordering information. Note: Do not connect a
keyboard or mouse to this port.
Mini-DIN Serial Port: Use this port to provide a direct terminal
connection to a computer with a terminal emulation program. A
serial cable (part number 73-1025) is included with the PDU. If you
need to order a replacement cable, contact Tripp Lite Customer
Support at (773) 869-1234.
Ethernet Port: Use this RJ-45 jack to connect the PDU to the
network with a standard Ethernet patch cable. The Link LED
Status LED
table below. This port is not compatible with PoE (Power Over
Ethernet) applications.
B
Link LED Color
A
Off
Flashing Amber
Flashing Green
Status LED Color
B
Off
Steady Green
Flashing Amber
, outlet
A
indicate several operating conditions, as shown in the
B
Network Operating Conditions
No Network Connection
100 Mbps Network Connection
10 Mbps Network Connection
Card Not Initialized
Card Initialized and Operational
Error - Card Not Initialized
A
B
11
and
A
11/9/2011 11:17:37 AM