Testing Network Connection; Configuration And Operation; Remote Monitoring; Technical Support - Tripp-Lite PDUMNH15 Manuel Du Propriétaire

3. Installation

3.4 Testing Network Connection

11 Access PDU with Web Browser: After an
IP address has been assigned to the PDU, attempt
to access it with a Web browser that supports
frames, forms and Java
on a computer connected to the LAN and enter
the IP address assigned to the PDU. You should
be prompted for a password
admin and the default password is admin. After
you enter the user name and password, the
PowerAlert Status page
browser window. For more information about
configuration and operation of the PDU via the
PowerAlert interface, refer to the
SNMPWEBCARD User's Guide, included on the
CD-ROM bundled with the PDU.
Note for Network Management System Users Only: Two MIB
files - Tripplite.mib and RFC1628.mib - must be loaded on each
Network Management Station that will monitor the PDU via
SNMP. The files are provided on the CD-ROM included in the
product package.

4. Configuration and Operation

4.1 Remote Monitoring

The PDU provides remote monitoring via Web
browser, telnet and SNMP-based Network
Management Systems.
Select models' outlets are silkscreened with
numbers below each outlet. Although these
outlets cannot be controlled, the
SNMPWEBCARD "Loads" tab contains a
"Description" field which allows you to label and
easily identify what load is plugged into each
outlet.
For more information about configuration and
operation of the PDU via the PowerAlert Web
browser interface, refer to the SNMPWEBCARD
User's Guide, included on the CD-ROM bundled
with the PDU.

5. Technical Support

Website: www.tripplite.com/support
E-mail: techsupport@tripplite.com
201006064 93-3049.indb 7
( continued )
™ . Open a Web browser
. The user name is
A
will appear in the
B
A
B
7
10/6/2010 4:48:46 PM