Zagg Slim Cover Instructions page 3

CHARGING
Your Slim Cover keyboard features a battery that delivers up to three months
of typing per charge*; and because the battery operates independent of
your Surface, you can type on the Slim Cover even when it's not physically
connected to your Surface. Here's how to charge your Slim Cover Keyboard:
1. Plug the micro USB end of the included charging cable into the Slim
Cover's charging port – located on the right side.
2. Plug the USB end of the included charging cable into any USB charging
outlet.
3. The LED will light red and stay lit until your Slim Cover is fully charged.
4. When the red LED goes off, your Slim Cover is fully charged. Unplug
the charging cable and enjoy up to three months of the most spacious,
natural typing available for your Surface.
* Based on one hour of use per day. Using the backlit feature will reduce battery life and require more frequent charging.
CHECKING BATTERY LIFE
Your Slim Cover can provide up to three months of regular typing per
charge. Checking how much battery life it has left is easy – here's how:
1. Press fn + CTRL (also the battery key). The LED will light one of three
ways.
a. Three green flashes indicate a full battery.
b. Three yellow flashes indicate approximately half battery life remaining.
c. Three red flashes indicate low battery life. When your Slim Cover
reaches critical battery level the LED will flash red once every five
minutes.
To help preserve battery life, your Slim Cover Keyboard will enter sleep
mode if left on but not used for several minutes. To wake it, press any key.
Also, the Slim Cover's battery has no memory and may be charged
whenever you wish.
2