Generator Sizing - Franklin Electric SubDrive 15 Manuel Du Propriétaire

Generator Sizing

Basic generator sizing for the Franklin Electric SubDrive/MonoDrive system is 1.5 times the maxi-
mum input watts consumed by the drive, rounded up to the next normal-sized generator.
Recommended minimum generator sizes:
Model Generator
MonoDrive
• 1/2 hp 2000 Watts
• 3/4 hp 3000 Watts
• 1.0 hp 3500 Watts
MonoDrive XT
• 1.5 hp 4000 Watts
• 2.0 hp 5000 Watts
IMPORTANT: Do not use with a Ground Fault Circuit Interrupter (GFCI). If using an externally regu-
lated generator, verify that the voltage, hertz, and idle speed are appropriate to supply the drive.
Model Generator
SubDrive 15 3500 Watts
SubDrive 20 5700 Watts
7000 Watts
SubDrive 30
SubDrive 50 11000 Watts
PRODUCT INFORMATION
Generator Sizing
11