User Controls; Powering The Pvs On And Off; Changing The Channel; Adjusting The Volume - Octane Fitness XR6000 Manuel D'utilisation

5. Press or to highlight "Load Channels From USB".
6. Press Press to begin the upload. (If no USB drive is detected within 10 seconds, the PVS will prompt you to
insert a USB drive.)
The PVS will display "Loading Channels", followed by "Channel Load Complete". You may then remove the USB
drive.

USER CONTROLS

Powering the PVS On and Off

• Press (Power), located on the lower right of the front panel of the PVS to bring the PVS out of standby
mode. The indicator light on the lower left of the PVS will turn from red to green and the PVS will power up.
• To place the PVS in standby mode, press and release
PVS front panel will turn from green to red and the PVS will go to standby.

Changing the Channel

• Press or (Channel Up or Down) to change available channels.

Adjusting the Volume

• Press or
the current volume setting on a bar graph.
ENG-7
Channel Scan Menu
Tuner Version
Country
Air/Cable
Start Scan
Display Channels Menu
Save Channels To USB
Load Channels From USB
Exit
Move
(Volume Down or Up) to decrease or increase volume. The PVS will momentarily display
Volume
1.26
Argentina
Air
Select/Modify Exit
(Power). The indicator light on the lower left of the
55