Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
IMPORTANT CONSUMER INFORMATION
CARE AND CLEANING
Do not use abrasive cleansers or solvents on acrylic
products.
Wipe out your acrylic fixture with a soft cloth after each
use to prevent a build-up of soap and scum. If the surface
gets excessively dirty you can use a general purpose
cleaner such as: Cinchr, Glass Plusr, 409r All Purpose,
Dow Soap Scum and Mildew Remover, Scrub Freer
Mildew Remover, Mr. Cleanr Lemon Fresh, or Fantastikr.
You can also use an automotive-type polishing
compound, followed by an application of good-quality
paste wax.
Avoid cleaning products that contain the following
chemicals, as they will damage the finish of your acrylic
fixture: acetone, ethyl alcohol, amyl or ethyl acetate,
sodium hypochlorite, toluene, or phenol.
Extreme heat such as that generated by cigarettes or
portable heaters can damage acrylic surfaces; do not use
such items near your fixture.
CALL US FOR HELP
Here's what you need to do if you require service:
First review the installation instructions to ensure correct installation. For additional assistance in the USA, call our
Customer Service Department for direct help. You may also contact us at our web site listed below.
B
1011308-2-
Call 1-800-4-KOHLER within the U.S.
Call 001-877-680-1310 within Mexico
Call 1-800-964-5590 within Canada
kohler.com
4
Kohler Co., Kohler, WI U.S.A.
Publicité
Table des Matières
