Connect To Mobile Phone; Introduction Of Function Keys; Menu Description - LC-POWER LC-M16-FHD-60-P Instructions D'utilisation

Connect to mobile phone

1. Connect the Type-C data cable to one of the Type-C ports of the machine and connect the other
end to the mobile phone.
2. Connect the Type-C power line to the other Type-C port of the machine and the corresponding
power adapter.

Introduction of function keys

1. Up key/shortcut volume icon/
turn-up progress bar/previous cycle
turn-down progress bar/next cycle
3. Power key 4. Power indicator
Up key: when the main menu is closed, the shortcut volume icon appears. Press it again for Volume +;
1
When the main menu is opened, this key is Turn-up progress bar and Previous cycle.
Down key: when the main menu is closed, the shortcut volume icon appears. Press it again for Volume -;
2
When the main menu is opened, this key is Turn-down progress bar and Next cycle.
Power key/shortcut menu key: when the main menu is closed, the menu appears. Hold this key for 6
seconds to turn the machine on/off;
3
When the main menu is opened, this key is the confirmation key for entering
the next level. Hold this key for 1s for the return key.
4 Power/signal indicator: Ice blue indicator - normal operation; orange indicator - standby; off - turned off.
Shortcut menu: Press the power key, then the shortcut OSD disappears. The window disappears after 5s
5
later when there is no operation.
Note: The keys of the actual model used shall prevail.
4
Type-C power line
Type-C data cable
2. Down key/
Speaker sound hole
5. Shortcut volume icon
Introduction of function keys

Menu description

1. When the machine is on, press the menu key to call up the main menu (OSD).
When selected, the background color of the home page icon turns blue and the luminance, contrast ratio
Home page
and sound options are shown in the rectangular box.
When selected, the background color of the ringer mode icon turns blue and the ringer mode sub-options
Ringer mode
are shown in the rectangular box. Click on the corresponding icon to select the desired ringer mode
When selected, the background color of the color temperature icon turns blue, and the color temperature
Color sub-options are shown in the rectangular box. Click on the corresponding icon to select the desired color
temperature temperature.
When the color temperature is User, the R,G,B options are activated. Slide the icon to adjust the RGB
size.
When selected, the background color of the color icon turns blue and the chromaticity, saturation, and
Color
sharpness options are shown in the rectangular box.
When selected, the background color of the eye care icon turns blue and the function of the eye care
Eye care
mode is enabled.
Mute When selected, the background color of the mute icon turns blue and mute is enabled.
When TYPE-C is selected, the background color of the TYPE-C icon turns blue, and the signal is
TYPE-C
TYPE-C switched to the TYPE-C port.
When HDMI is selected, the background color of the HDMI icon turns blue and the signal is switched to
HDMI
the HDMI port.
OD When OD is selected, the background color of the OD icon turns blue and the OD function is enabled.
When DCR is selected, the background color of the DCR icon turns blue and the DCR function is
DCR
enabled.
When Reset is selected, the background color of the Re-set icon will turn blue. After a while, the
Reset
background color of the Reset icon will turn blue.
EXIT When EXIT is selected, the background color of the EXIT icon turns blue and the home page disappears.
5