Seltron RCD1 Mode D'emploi page 17

T12 CONTROLLER SENSOR
t1.12
Measured and calculated temperatures for T12 sensor are displayed alternately.
THE FIRST HEATING CIRCUIT TR1
t1.13 Measured and desired room temperatures of the first heating circuit are displa-
yed alternately.
THE SECOND HEATING CIRCUIT TR2
t1.14 Measured and desired room temperatures of the second heating circuit are
displayed alternately.
DIRECT CIRCUIT
t1.15
Calculated temperature of the riser for direct circuit is displayed.
d1 information group - general information
d1.1 ROOM UNIT TYPE (RCD1, RCD2 etc.)
d1.2 ROOM UNIT SOFTWARE VERSION
TYPE OF CONTROLLER CONNECTED TO ROOM UNIT
WXD10B = 20
WXD20 = 22
d1.3 WDC10 = 33
KXD10B = 50
KXD20 = 52
KUD10 = 81
d1.4 SOFTWARE VERSION OF THE CONTROLLER
d1.5 HYDRAULIC SCHEME OF THE CONTROLLER
d1.6 LIGHT SENSOR
Measured light of the room where the room unit is installed is displayed.
P1 parameter group - basic parameters
No. Description
TEMPERATURE DISPLAY ROUND-OFF
With this setting, we can determine to what value the
P1.1
measured temperature display will be rounded off.
AUTOMATIC EXIT TIME
P1.2 This setting determines the time after which the
display returns to basic mode.
DISPLAY ILLUMINATION SHUT-OFF TIME
P1.3 This setting determines the time after which display
lighting is reduced or shut off.
WXD10 = 21
WDC10b = 32
WDC20 = 42
KXD10 = 51
KPD10 = 71
CMP25 = 92
Range
0 - 0.1 °C
1 - 0.2 °C
2 - 0.5 °C
3 - 1.0 °C
3 ÷ 180 s (15)
10 ÷ 180 s (30)
English 17