Advice For The User Of The Edge Banding Device - WEGOMA Porta Master PM3000 Mode D'emploi

Porta Master PM3000
4 Preparation of edge banding device for operation
4.1

Advice for the user of the edge banding device

Adherence as one of the most efficient joining techniques is constantly gaining in importance and
new application areas. At the same time the number of materials that have to be connected is
increasing rapidly. New methods and tools for processing adhesives are being developed.
These constant changes are met by intensive research and development. The glue manufactur-
ers are innovatively working for you to get an optimal consulting and the best adhesive for your
application.
These specifications are based on our tests conducted in laboratories and practical experience,
also of our customers. Of course these data cannot cover all parameters that apply to each case
of application and therefore are for information only and without responsibility.
An inspection for adequacy – conducted by the user himself is essential – in each case of applica-
tion of adhesives recommended by us. This applies to the first sampling inspection of a product
as well as to changes during a running production.
Therefore we advert new customers that the recommended adhesives need to be tested for their
possible application with original parts according to the operating condition. Subsequently pro-
duced adhering need to be exposed to actual conditions and need to be evaluated. This testing is
essential. Using the adhesive without these precautions is at your own risks.
Our specifications are based on the results in practice and are no warranty of properties in the
sense of the new jurisdiction of the Federal Court of Justice (Bundesgerichtshof). No liability can
be derived from the usage of our free technical consulting service.
35