Removing The Rechargeable Battery - Philips sonicare FlexCare+ 900+ Serie Mode D'emploi

ENGLISH
18
Recycling
- This symbol on a product means that the product is covered by
European Directive 2012/19/EU (Fig. 20).
- This symbol means that the product contains a built-in rechargeable
battery covered by European Directive 2006/66/EC which cannot be
disposed of with normal household waste. Follow the instructions in
section 'Removing the rechargeable battery' to remove the battery
(Fig. 21).
- Inform yourself about the local separate collection system for
electrical and electronic products and rechargeable batteries.
Follow local rules and never dispose of the product and rechargeable
batteries with normal household waste. Correct disposal of old
products and rechargeable batteries helps prevent negative
consequences for the environment and human health.

Removing the rechargeable battery

Please note that this process is not reversible.
To remove the rechargeable battery, you need a flat-head (standard)
screwdriver.
1 To deplete the rechargeable battery of any charge, remove the
handle from the charger, switch on the Sonicare and let it run until
it stops. Repeat this step until you can no longer switch on the
Sonicare.
2 Insert a flat-head (standard) screwdriver into the slot located at
the bottom of the handle. Turn the screwdriver anticlockwise to
release the bottom cap. (Fig. 22)
3 Hold the handle upside down and push down on the shaft to
release the internal components of the handle (Fig. 23).
4 Insert the screwdriver under the circuit board, next to the battery
connections, and twist to break the connections. Remove the
circuit board and pry the battery from the plastic carrier (Fig. 24).