Hitachi RAK-50NH5 Mode D'emploi page 13

Masquer les pouces Voir aussi pour RAK-50NH5:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 54
3
2
Press the
TIMER control button.
(TIME) button.
AM
PM
2
Set the turn-off time with the
TIMER control button.
PM
2
Set the turn-on time with the
TIMER control button.
AM
4
Set the turn-on time with the
TIMER control button.
PM
AM
The timer may be used in three ways: off-timer, on-timer, and ON/OFF (OFF/ON)-timer. Set
G
the current time at first because it serves as a reference.
As the time settings are stored in memory in the remote controller, you only have to press
G
the
(RESERVE) button in order to use the same settings next time.
All manuals and user guides at all-guides.com
Set the current time with the
PM
Example: The current time is 1:30 p.m.
3
Point the signal window of the remote controller toward the indoor unit, and
press the
(RESERVE) button.
The
(OFF) mark starts lighting instead of flashing and the sign
lights. A beep occurs and the
3
Point the signal window of the remote controller toward the indoor unit, and
press the
(RESERVE) button.
The (ON) mark starts lighting instead of flashing and the
lights. A beep occurs and the
5
Point the signal window of the remote controller toward the indoor unit, and
press the
(RESERVE) button.
The (ON) mark starts lighting instead of flashing and the
lights. A beep occurs and the
PM
AM
– 13 –
4
Press the
(TIME) button again.
The time indication starts lighting
instead of flashing.
PM
(TIMER) lamp lights on the indoor unit.
PM
Example: The device will turn off at 11:00p.m.
The setting of turn-off time is now complete.
(TIMER) lamp lights on the indoor unit.
Example:
The device will turn on at 7:00 a.m.
AM
The setting of the turn-on time is now complete.
(TIMER) lamp lights on the indoor unit.
Example:
The device will turn off at 10:30 p.m. and it will be turned on
at 7:00 a.m.
The settings of the turn-on/off times are now complete.
G
The time indication will disappear
automatically in 10 second.
G
To check the current time setting,
press the
(TIME) button twice.
The setting of the current time is
now complete.
(RESERVED)
(RESERVED) sign
(RESERVED) sign

Publicité

Table des Matières
loading

Table des Matières