Wolf CI152TF/S Guide D'utilisation Et D'entretien page 12

C OO KT O P O P E RAT I O N
Cooktop Operation
D U A L -Z O N E O R O VA L E L E M E N T ( E L E C T R I C )
Setting controls:
To activate dual-zone or oval element, touch ON/OFF on
1
the control panel. Power level indicator will flash and all
indicators for that zone will flash.
Set desired heat level for inner zone as described
2
on page 11. Outer zones cannot be turned on indepen-
dently of inner zone.
Touch ZONE 2 or OVAL. Outer zone will be set to the
3
same heat setting as inner zone.
nate to indicate outer zone is on. Refer to the illustration
below.
Change heat setting for the entire dual-zone or oval
4
element the same as for a single element. Both zones
maintain the same heat setting.
To turn outer zone off, touch ZONE 2 or OVAL. To turn
5
the entire element off, touch ON/OFF.
ZONE 2
Dual-zone element activation.
|
12 Wolf Customer Care 800.222.7820
TR IPL E-ZO N E EL EME N T (E LEC TR IC )
Setting controls:
1
2
3
or will illumi-
4
5
6
Triple-zone element activation.
To activate triple-zone element, touch ON/OFF on the
control panel. Power level indicator will flash and all
indicators for that zone will flash.
Set desired heat level for inner zone as described
on page 11. Outer zones cannot be turned on indepen-
dently of inner zone.
Touch ZONE 2. Middle zone will be set to the same
heat setting as inner zone.
middle zone is on.
Touch ZONE 3. Outer zone will be set to the same heat
setting as inner and middle zones.
indicate outer zone is on. Refer to the illustration below.
Change heat setting for the entire triple-zone element the
same as for a single element. All three zones maintain
the same heat setting.
To turn outer zone off, touch ZONE 3. To turn middle
zone off, touch ZONE 2. To turn the entire element off,
touch ON/OFF.
ZONE 2 ZONE 3
will illuminate to indicate
will illuminate to