Wolf M Serie Guide D'utilisation Et D'entretien page 10

Masquer les pouces Voir aussi pour M Serie:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

M IC R O WAV E O V E N O PE R AT I O N
Settings
The settings feature allows the user to select individual pref-
erences. Preferences must be reset after a power outage.
AU DIB L E S I G NA L
An audible signal chimes with every touch and upon cook
time and timer completion.
To eliminate the signal:
Touch SETTINGS.
1
Touch DECREASE.
2
Touch START. "SOUND OFF" appears on the control
3
panel display.
To restore the signal:
Touch SETTINGS.
1
Touch INCREASE.
2
Touch START. "SOUND ON" appears on the control
3
panel display.
C OO K T I M E CO M P L E T I O N R E MI N D E R
Upon completion, the microwave oven chimes every
ten seconds for the first minute; then every three minutes
(for one hour) until STOP/CLEAR is touched.
To eliminate the reminder:
Touch SETTINGS twice.
1
Touch DECREASE.
2
Touch START. "REMIND SIGNAL OFF" appears on the
3
control panel display.
To restore the reminder:
Touch SETTINGS twice.
1
Touch INCREASE.
2
Touch START. "REMIND SIGNAL ON" appears on the
3
control panel display.
|
10
Wolf Customer Care 800.222.7820
WE IGH T U N IT
For cooking modes where weight is required, the default
unit of measure can be changed from pounds to kilograms.
To change the unit of measure to kilograms:
Touch SETTINGS three times.
1
Touch DECREASE.
2
Touch START. "KGS SET" appears on the control panel
3
display.
To change the unit of measure to pounds:
Touch SETTINGS three times.
1
Touch INCREASE.
2
Touch START. "LBS SET" appears on the control panel
3
display.
FAC TO RY SET TIN GS
To restore the microwave oven to factory settings:
Touch SETTINGS four times.
1
Touch START. "FACTORY SETTINGS RESTORED"
2
appears on the control panel display.
D EM O N STR ATIO N M O D E
Demonstration mode allows operation to be demonstrated
without power to the microwave oven.
To enter demonstration mode:
Touch SETTINGS five times.
1
Touch INCREASE.
2
Touch START. "DEMO ON" appears on the control panel
3
display. "DEMO" remains on the display.
To exit demonstration mode:
Touch SETTINGS five times.
1
Touch DECREASE.
2
Touch START. "DEMO OFF" appears on the control panel
3
display.

Publicité

Chapitres

Table des Matières
loading

Table des Matières