ASROCK K10N78M Pro Mode D'emploi page 18

Table des Matières

Publicité

Step 8.
Click the desktop. Then your system is switched to HybridPower
(Save Power).
C. Dual Monitors
C. Dual Monitors
C. Dual Monitors
C. Dual Monitors
C. Dual Monitors
Step 1.
Install one compatible PCI Express graphics card to PCIE2 slot (green). For
the proper installation procedures, please refer to section "Expansion Slots".
Step 2.
Boot your system. Press <F2> to enter BIOS setup. Enter "Advanced" screen,
and enter "Chipset Settings". Then set the option "Share Memory" to [32MB],
[64MB], [128MB], [256MB] or [512MB].
Step 3.
Connect one monitor cable to the correspondent connector on the I/O shield.
Connect the other monitor cable to the correspondent connector on the PCI
Express graphics card on PCIE2 slot.
Step 4.
Boot into OS. Install Hybrid SLI
Hybrid SLI
TM
(There are two ASRock support CD in the motherboard gift box pack, please
choose the one for Windows
..\Drivers\Hybrid SLI driver\Vista
* Currently, Hybrid SLI
website for future update.
Step 5.
Restart your computer. Then you will find the Hybrid icon on your Windows
taskbar. Please click the icon and select the item "Additional Displays".
Step 6.
Click the desktop. Then your system is switched to Dual Monitors mode
(Additional Displays).
1 8
1 8
1 8
1 8
1 8
ASRock
TM
driver from our support CD to your system.
driver is in the following path of ASRock support CD:
®
TM
Vista
/ Vista
TM
driver only has Vista
K10N78M Pro
Motherboard
TM
TM
64-bit.)
TM
32 version, please visit our
mode
®

Publicité

Table des Matières
loading

Table des Matières