Language Selection - Detnov CCD-108 Manuel D'installation Et Mode D'emploi

3.3.3- Fixing the panel to the wall
Place the rear housing in the proper position against the wall and mark the position
of the holes to make sure the casing is level.
Do not use the back cover as a guide when drilling the holes, as this may cause
irreparable damage to the equipment.
Drill holes in the wall, and prepare the required holes for the cable installation. Screw
the cabinet to the wall using the holes in the box.
GB

3.3.4- Language Selection

The panel's controls are designed to be easy to customize the language. In the
languages sheet attached to this manual, you will find the text corresponding to
different languages. Select the required language and insert the card into the slot
located at the bottom of the keyboard. The locations are marked with the letters A,
B and C.
8